galvanic machine

[dawniet]

HI Guys,
i have just brought a galvanic machine i brought it on ebay and it is from Japan i paid £160 for it and it seems to not have a very strong output i have to have the intensity up as high as it would go. The machine i used at college was much stronger output. Can anybody advise me if this is correct with home Galvanic machines that they are not as strong output or have i a faulty machine??

 

[satinbaby]

Hi i have a Quantas machine and its very very good i dont need it on the strongest i dont use it anymore actually due to having a body ultimate machine for microcurrent that has built in Galvanic i must get round to selling it!!
Check all the leads make sure they are all in the right holes etc ,,,,ive never brought from Japan but make sure u get it properly tested by a qualified electrician before using it on clients xxxx Good luck xx

 

[dawniet]

Thanks alot for your advise. Where did you get your machine from just incase i end up sending this machine back i would rather go for a brand that is recommended. Cheers

 

[Sunless Tanning]

Hello

I would recommend you to check its brand and verify the actual price via research. costing may leave you right clues to what extent the quality of your machine is. Least follow the previosu advice, try to check on a electrical tech guys if you are using the right thing and with the right method.:green:

 

[connor1]

Yeh total agree with the other two comments. You need to check that the leads are in the correct outputs etc. I Know with my icon machine especially on the galvanic setting the current is very strong, and I couldn't possibly turn it up to maximum. Are you sure that you haven't bought a home use machine for general public, as it will be alot weaker than a professional use only machine anyway. xx