Quantcast

Reducing help - Scratches on CND enhancements, efile used

SalonGeek

Help Support SalonGeek:

Uber

Active Member
Joined
Jul 19, 2010
Messages
36
Reaction score
0
Location
Kent
Ok so I have been using an efile after applying product and then I smooth the edges with the Kanga board and then i am using the boomerang to smooth and eliminate surfaces before rubbing in my solar oil. Except I am still see scratches unless i am not spending long enough with my boomerang. What can i do to reduce scratches in the first place. I am thinking its something to do with the efile. Am i right?
 

angel fingers

Well-Known Member
Joined
Nov 5, 2003
Messages
7,381
Reaction score
234
Location
northampton
this happens when you are not reducing the grits gradually enough.

say the equivalent to your efile bit is 100 grit but then you go down to say 300 grit. the three hundred is too gentle to erase the marks that a 100 grit would leave behind.

just do things a bit more gradually and you wont have a problem, either use a smoother bit in the efile or add in another file before you reduce down to a buffer.
 

katiebbaby

Well-Known Member
Joined
Jun 11, 2009
Messages
1,372
Reaction score
40
Location
liverpool uk
I agree with Susan, go down with your grits and there should be no probs. I used my efie the other day 180 then hand filed with hotshot and koala both sides and the shine was fab,::;;)
 
Last edited:

Uber

Active Member
Joined
Jul 19, 2010
Messages
36
Reaction score
0
Location
Kent
cool :) thanks ladies for the advice!!!
 

Latest posts

Top