Show us your lashes!

SalonGeek

Help Support SalonGeek:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
No problem. Just one length? Blimey who did you train with?

Yes I'd start with shorter lengths in a 0.15mm thickness. On the inner corners 8mm, centre 10mm and outer corners 11mm or 12.

Just keep practicing and you'll add more lashes as you go. Once you're confident you can add various lengths & thicknesses but I'd stick to those sizes for now until you're ready to play!
Good luck x

Little company near me, they help through my case studies so would prob advise me in future I guess.
Thank you so much, I just used 0.25 12mm the whole way lol.
I'll give those sizes a go next time :)
Thanks xxx
 
Little company near me, they help through my case studies so would prob advise me in future I guess.
Thank you so much, I just used 0.25 12mm the whole way lol.
I'll give those sizes a go next time :)
Thanks xxx

They really shouldn't be recommending a .25 as they're way too heavy. X
 
They really shouldn't be recommending a .25 as they're way too heavy. X

Oh right, I'll give them a call today & question a few things then.
Thank you for your help x
 
Another set from today :)
 

Attachments

  • ImageUploadedBySalonGeek1356206905.888624.jpg
    ImageUploadedBySalonGeek1356206905.888624.jpg
    134 KB · Views: 352
  • ImageUploadedBySalonGeek1356206937.478444.jpg
    ImageUploadedBySalonGeek1356206937.478444.jpg
    124.3 KB · Views: 360
Lengths from 8mm to 11mm

Thicknesses 0.07 to 0.15mm
 

Attachments

  • audreysingle.jpg
    audreysingle.jpg
    57.2 KB · Views: 354
Second set. Using 0.15 D curl. 7mm inside corners & 9mm rest.
Again criticism welcome xx
 

Attachments

  • ImageUploadedBySalonGeek1356285068.421421.jpg
    ImageUploadedBySalonGeek1356285068.421421.jpg
    83.8 KB · Views: 390
I know but I hate confrontation :-( I'm such a wimp!

Just following the thread here, sorry about your disaster lashes a tech (if you can even call her that) like this make me so cross, the poor clients she's fooling! If you pm her Facebook page id be more than happy to upload that eBay picture and say I'd noticed she does lashes for eBay models! See what her reaction is then!
 
Hi I'm wondering if anyone can help me with this. I'm trained in Lash Perfect lash extensions and I'm finding it less fiddly to use the mink lashes on a strip rather than the loose ones but they only seem to do them in thick and extra thick. Does anyone know if of any good quality lashes that are 0.15mm?
 
Hi I'm wondering if anyone can help me with this. I'm trained in Lash Perfect lash extensions and I'm finding it less fiddly to use the mink lashes on a strip rather than the loose ones but they only seem to do them in thick and extra thick. Does anyone know if of any good quality lashes that are 0.15mm?

www.eyeluvlashes.co.UK :)

Sent from my HTC Sensation XL with Beats Audio X315e using Tapatalk 2
 
I'll have a look at those, thanks x
 
Thought this might make you all smile and prove just how addictive lashes are:

My mum is 60 and I did her lashes for a bit of practice and to get some more pictures (because I keep forgetting to take them!). This was back in the summer. She was so pleased with them, she asked me when I've got a free slot to do them again for her :D

From a woman who didn't really have any treatments done before I became a therapist! x
 
Done all of my 5 case studies and the 2 I've done today I've been so pleased!! Took me 1hr 45 mins, used 0.25 D 12mm & few 9mm & 10mm. They wanted a big party look :)
I'm pleased with the outcome but still would love your views :)
 

Attachments

  • ImageUploadedBySalonGeek1356711493.129792.jpg
    ImageUploadedBySalonGeek1356711493.129792.jpg
    82.4 KB · Views: 389
  • ImageUploadedBySalonGeek1356711509.369535.jpg
    ImageUploadedBySalonGeek1356711509.369535.jpg
    84.8 KB · Views: 365
Done all of my 5 case studies and the 2 I've done today I've been so pleased!! Took me 1hr 45 mins, used 0.25 D 12mm & few 9mm & 10mm. They wanted a big party look :)
I'm pleased with the outcome but still would love your views :)

Well done!
The best bit of advice I think I would give (As was what I needed when I started) is concentrate really hard on getting them on straight- if they start to tilt off in their own direction, manipulate them with the tweezers and hold there for a couple seconds longer to make sure they stay there. Keeping in mind to make sure they are married well at the bottom.

You will get quicker eventually but don't worry about how long it takes while practicing :) x

Sent from my GT-I9100 using SalonGeek
 
Well done!
The best bit of advice I think I would give (As was what I needed when I started) is concentrate really hard on getting them on straight- if they start to tilt off in their own direction, manipulate them with the tweezers and hold there for a couple seconds longer to make sure they stay there. Keeping in mind to make sure they are married well at the bottom.

You will get quicker eventually but don't worry about how long it takes while practicing :) x

Sent from my GT-I9100 using SalonGeek

Thank you, that is one thing I can't seem to change lol! Ill hold them for longer :) xx
 
Thank you, that is one thing I can't seem to change lol! Ill hold them for longer :) xx

Easy once you get the hang of it! Just hold the tweezers on the side thr lash is trying to fall to! Keep us updated! :) Good luck! x

Sent from my GT-I9100 using SalonGeek
 
Set from yesterday.
C curl 0.20mm in 14,12 & 10mm
 

Attachments

  • ImageUploadedBySalonGeek1357343079.932801.jpg
    ImageUploadedBySalonGeek1357343079.932801.jpg
    33.9 KB · Views: 289
  • ImageUploadedBySalonGeek1357343107.992176.jpg
    ImageUploadedBySalonGeek1357343107.992176.jpg
    35.1 KB · Views: 276
They are amazing for your first set! Yes there are more that can be filled so maybe use a finer lash .15 or .10 to add a bit more volume. if you're enjoying it at this stage and judging by your pics you'll be pretty darn good!
 

Latest posts

Back
Top