I bought a Clean and Easy roller system and have had no problems until today. I did 3/4 of a leg fine, then something happened to the wax heat and it stuck to the skin and wouldn't come off. I probably put it on too thick but it just wouldn't come off with lots of rubbing and pulling and the wax remover oil didn't work. Help!!! What can I do if that happens again? I had to send the lady home sticky with a big blob of wax on and I'm not happy about it.:irked:
Wax removal help
- Thread starter luby
- Start date
Help Support SalonGeek:
jacquelineanna
Well-Known Member
Put more wax over the top and remove again, you may need to remove in opposite direction to get it off.
Jacqui xx
Jacqui xx
bombini
Well-Known Member
I had the same thing happen to me years ago when I used the clean + easy system, luckily the client had a VERY gsoh !!
I couldn't get it off with strips, like you it was literally stuck. I ended up having to scrub it off with hot towels, and then try and get as much off with the strips. Total nightmare. I couldn't continue the treatment as the spa then had a power cut so it couldn't of got much worse !!
I came to the conclusion that I had problems because the clients legs were really cold and it was first thing in the morning so the room wasn't very warm either. I think we swapped to PHD waxing not long after but I can't remember any other problems with clean + easy apart from that one.
I couldn't get it off with strips, like you it was literally stuck. I ended up having to scrub it off with hot towels, and then try and get as much off with the strips. Total nightmare. I couldn't continue the treatment as the spa then had a power cut so it couldn't of got much worse !!
I came to the conclusion that I had problems because the clients legs were really cold and it was first thing in the morning so the room wasn't very warm either. I think we swapped to PHD waxing not long after but I can't remember any other problems with clean + easy apart from that one.
