Help with putting dangles on!!!!!

[kimmberlei]

Hi again peeps!

Ive just bouht some great stuff of one of our fellow geeks... BUT i cant seem to put a dangle on myself! I have a set of fairly short enhancements but long enough for a dangle. I drilled the hole but for the life of me, i cant seem to even get the tiny ring on its that small!

Tell me, how do you do it and is there a knack to it?????

Cheers all!!!

 

[rach269]

hi this is how i put mine on i get sum tweezers in each hand and open the o'

ring right hand push the o ring forward left hand pull it backwards i hope this

maked sense i then put it through the hole put my dangle on and with my

right hand tweezers sqeeze back together i really dont know if this makes

sense at all but hope it helps :hug:

 

[kimmberlei]

hi this is how i put mine on i get sum tweezers in each hand and open the o'

ring right hand push the o ring forward left hand pull it backwards i hope this

maked sense i then put it through the hole put my dangle on and with my

right hand tweezers sqeeze back together i really dont know if this makes

sense at all but hope it helps :hug:

cool...ill go find some tweezers later and have ago!!! Im just getting sooo frustrated!!! lol

 

[VHunter]

I also find using needle-nose tweezers works best.
See here helpfulhint to see how an o-ring should be opened.
Opening it as suggested will distort the shape. It should be opened sideways as indicated in the link.

I open it sideways, put it on, twist it back, then gently push the ends together tighter using the pliers by a gentle squeeze.
Add a dollop of clear polish or glue to seal the joint.

hth's

 

[kimmberlei]

I also find using needle-nose tweezers works best.
See here helpfulhint to see how an o-ring should be opened.
Opening it as suggested will distort the shape. It should be opened sideways as indicated in the link.

I open it sideways, put it on, twist it back, then gently push the ends together tighter using the pliers by a gentle squeeze.
Add a dollop of clear polish or glue to seal the joint.

hth's

Cool link..cheers!! Will definatly try this now! xx

 

[rach269]

I also find using needle-nose tweezers works best.
See here helpfulhint to see how an o-ring should be opened.
Opening it as suggested will distort the shape. It should be opened sideways as indicated in the link.

I open it sideways, put it on, twist it back, then gently push the ends together tighter using the pliers by a gentle squeeze.
Add a dollop of clear polish or glue to seal the joint.

hth's

thats a great link just how i was trying to explain to do it lol :lol:

 

[VHunter]

:lol:


I created that tut for the seller:wink2:



So THANKS:!: