sophiegees
Well-Known Member
Well yesterday I completed my whole set of shellac colours when 18 arrived from sweetsquared to add to the 6 I already had. Now I just have to learn to apply it properly!
I have to say I have spent the whole afternoon reading the whole 52 pages of posts on the shellac group and would recommend anyone new to shellac to do the same. I have learnt so much. I started a week ago with shellac and have done around 12 practice sets on friends. I have encountered problems but now have some ideas to try.
One thing I will mention is the thumbs! They are wrinkling at the side closest to the base of the lamp. Eg after applying the first colour coat if I wipe the wrinkles they just come off leaving just the base coat (well I assume the base coat is still there).
So I am thinking - applying too thick and as the thumb is at an angle the shellac is running down to the bottom of the thumb and its not curing. So will try applying thinner.
Also did think that because of the angle of the thumb that it was not accessing any of the uv light so wasnt curing. So in later sets I made sure the fingers were all stretched out. But it still happened.
I had a girl yesterday and she had been to a salon and had shellac. She said that they cured 4 fingers at a time, and then the 2 thumbs together. So I tried this. This seemed to really work - but I am sure you guys dont do this - and it takes so much longer.
My plan for the next time is to make sure the scrub fresh has evaporated properly, make sure the base coat is on fully - ie right to the edges, make sure the coats are thinner - ie working on getting just the right amount on my brush to cover the nail in as few strokes as possible, but not thick. Also perhaps make sure their thumb is raised as opposed to laying on the bottom of the lamp.
I also have jagged sides - but hopefully by doing the above it will solve that.
If anyone has any thoughts on my thumb issues I would be grateful for your advice. Sorry to have written a novel.....
xx
I have to say I have spent the whole afternoon reading the whole 52 pages of posts on the shellac group and would recommend anyone new to shellac to do the same. I have learnt so much. I started a week ago with shellac and have done around 12 practice sets on friends. I have encountered problems but now have some ideas to try.
One thing I will mention is the thumbs! They are wrinkling at the side closest to the base of the lamp. Eg after applying the first colour coat if I wipe the wrinkles they just come off leaving just the base coat (well I assume the base coat is still there).
So I am thinking - applying too thick and as the thumb is at an angle the shellac is running down to the bottom of the thumb and its not curing. So will try applying thinner.
Also did think that because of the angle of the thumb that it was not accessing any of the uv light so wasnt curing. So in later sets I made sure the fingers were all stretched out. But it still happened.
I had a girl yesterday and she had been to a salon and had shellac. She said that they cured 4 fingers at a time, and then the 2 thumbs together. So I tried this. This seemed to really work - but I am sure you guys dont do this - and it takes so much longer.
My plan for the next time is to make sure the scrub fresh has evaporated properly, make sure the base coat is on fully - ie right to the edges, make sure the coats are thinner - ie working on getting just the right amount on my brush to cover the nail in as few strokes as possible, but not thick. Also perhaps make sure their thumb is raised as opposed to laying on the bottom of the lamp.
I also have jagged sides - but hopefully by doing the above it will solve that.
If anyone has any thoughts on my thumb issues I would be grateful for your advice. Sorry to have written a novel.....
xx