Let's see your tan!

SalonGeek

Help Support SalonGeek:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Set on 3-4 depending which bit I'm tanning, have it lower when doing chest etc as it gets too wet otherwise. Dial at front not too tight and on vertical spray. I go over front and back horizontally afterwards and vertically on legs.

I have mine set on 8 so that means you'd b using more spray than me doesn't it? Because I have found that one spray is too light on clients so I might just keep the 8 setting but do 2 coats? .... Uh I thought I had everything down to a tee and then last nits spray tan error happened...
 
8 means more tan comes out. Watch Steve from Nouvatan's video on setting the gun, it's all about combination of the dial and the front screw on bit. I'll try and find the link to it.
 
Scaffrey just realised you have TS20 and I have TS50 mis it the new Helia gun because that's what I have so maybe yours is different to mine?
 
8 means more tan comes out. Watch Steve from Nouvatan's video on setting the gun, it's all about combination of the dial and the front screw on bit. I'll try and find the link to it.

Oh!???? Yea if you could send me that link.... Confused.com now!
 
Oh!???? Yea if you could send me that link.... Confused.com now!

Think i Found the video on YouTube... Is it the helix gun you have? I have the ts20 so settings are different.
 
All the prom girls cloughers look lovely. Well done x
 
Thanks! Can't believe they're 16, they look about 25 and like they belong on Dallas!!
 
OMG 16% x
 

Attachments

  • ImageUploadedBySalonGeek1372587043.377581.jpg
    ImageUploadedBySalonGeek1372587043.377581.jpg
    90.8 KB · Views: 335
OMG 12% x
 

Attachments

  • ImageUploadedBySalonGeek1372587063.243944.jpg
    ImageUploadedBySalonGeek1372587063.243944.jpg
    115 KB · Views: 281
  • ImageUploadedBySalonGeek1372587071.560989.jpg
    ImageUploadedBySalonGeek1372587071.560989.jpg
    105.9 KB · Views: 257
OMG 16% :) x
 

Attachments

  • ImageUploadedBySalonGeek1372587247.245983.jpg
    ImageUploadedBySalonGeek1372587247.245983.jpg
    90.8 KB · Views: 263
  • ImageUploadedBySalonGeek1372587253.847178.jpg
    ImageUploadedBySalonGeek1372587253.847178.jpg
    104.1 KB · Views: 266
  • ImageUploadedBySalonGeek1372587262.412576.jpg
    ImageUploadedBySalonGeek1372587262.412576.jpg
    119.7 KB · Views: 280
LA Fast Tan on a friend :)

1372593517470.jpg

Sent from my R800i using SalonGeek mobile app
 
Suntana After Dark (14%) before, with Guide and after.
 

Attachments

  • 1044543_484657294948054_834987851_n.jpg
    1044543_484657294948054_834987851_n.jpg
    37.1 KB · Views: 317
  • 1044602_484657334948050_622124880_n.jpg
    1044602_484657334948050_622124880_n.jpg
    55.6 KB · Views: 318
  • 1045250_10151695978560630_698299141_n.jpg
    1045250_10151695978560630_698299141_n.jpg
    75.8 KB · Views: 360
I have mine set on 8 so that means you'd b using more spray than me doesn't it? Because I have found that one spray is too light on clients so I might just keep the 8 setting but do 2 coats? .... Uh I thought I had everything down to a tee and then last nits spray tan error happened...

my machine is a maximist 5008 but gun looks same as your machine, I have mine set at 9-10 oclock. so about a quarter turn to the left after you've firstly tighenend the black screw. I blast it through with gun fully openend when cleaning with soapy warm water( screw turned left many times so lets water really spray through) remember to set it back to 9 or 10 afterwards though lol. that really sorted my gun out after I was getting hardly any spray out and bursts of spray good luck.:D
 
Nouvatan 14% and 12%
 

Attachments

  • ImageUploadedBySalonGeek1372688756.746083.jpg
    ImageUploadedBySalonGeek1372688756.746083.jpg
    45.3 KB · Views: 350
A few I'm trying out. These are just after spraying. Suntana 8%. La tab 8% gold n suntana 10%. Im new to tanning and have the little piggy machine. Hvlp 550 I think it is n I'm using like 80-90ml each time. I have the gun turned down n only spray once. The tans fade nice n theres no streaking etc. but why am I using so much liquid.
 

Attachments

  • ImageUploadedBySalonGeek1372722415.392808.jpg
    ImageUploadedBySalonGeek1372722415.392808.jpg
    136.7 KB · Views: 271
  • ImageUploadedBySalonGeek1372722451.279724.jpg
    ImageUploadedBySalonGeek1372722451.279724.jpg
    155.8 KB · Views: 238
  • ImageUploadedBySalonGeek1372722486.859375.jpg
    ImageUploadedBySalonGeek1372722486.859375.jpg
    153.7 KB · Views: 241
A few I'm trying out. These are just after spraying. Suntana 8%. La tab 8% gold n suntana 10%. Im new to tanning and have the little piggy machine. Hvlp 550 I think it is n I'm using like 80-90ml each time. I have the gun turned down n only spray once. The tans fade nice n theres no streaking etc. but why am I using so much liquid.

Its most likely you need to adjust your gun again. Turn it til it releases no spray then up small amounts, until you can get a good amount of coverage.

Then spray slowly, or at a slower speed.

I find this works best to reduce over spray, i also feel like i have more control over the tan, as I don't have to rush. I also only spray once.

Xx
 
A few I'm trying out. These are just after spraying. Suntana 8%. La tab 8% gold n suntana 10%. Im new to tanning and have the little piggy machine. Hvlp 550 I think it is n I'm using like 80-90ml each time. I have the gun turned down n only spray once. The tans fade nice n theres no streaking etc. but why am I using so much liquid.

I'm loving the brownness of the suntana! Ooh I might try that, I have sample bottles upstairs,.. Anyone else with pics of suntana?

As for the gun and using too much spray. I'd suggest what others have suggested on here, get your gun with solution in it and do the towel test, adjust your settings accordingly during that process:

Helia spray tan gun trouble shooting - YouTube

YouTube video is for another machine, but use the general process to adjust your gun ;-)
 
She possibly shaved her legs with a razor with a moisturising strip. I understand this can cause exactly this problem.
 

Latest posts

Back
Top